<var id="ph7v7"></var>
<var id="ph7v7"></var>
<var id="ph7v7"><video id="ph7v7"><thead id="ph7v7"></thead></video></var>
<cite id="ph7v7"><video id="ph7v7"></video></cite>
<cite id="ph7v7"></cite>
<var id="ph7v7"></var>
<var id="ph7v7"><video id="ph7v7"></video></var>
<var id="ph7v7"></var>
<cite id="ph7v7"><video id="ph7v7"><thead id="ph7v7"></thead></video></cite>
<cite id="ph7v7"></cite>
保定漆彩建筑裝飾工程有限公司
?

資訊分類

更多

產品分類

更多

最新資訊

更多
地址:河北省保定市順平縣永平大街118號
郵箱:40423960@qq.com
電話:15081222333 0312-7615081
傳真:0312-7655558

新聞中心

當前位置:首頁 > 新聞中心 > 保定環氧地坪漆膜固化以后表面出現氣泡該如何解決

保定環氧地坪漆膜固化以后表面出現氣泡該如何解決

2021-03-23

保定環氧地坪漆膜固化以后表面會出現很多氣泡,如何解決?保定環氧地坪出現氣泡這是必然的現象,只要是氣泡的產生,主要原因是:涂料使用過程中,由于攪拌、施工,環氧同固化劑反應產生的熱量產生的空氣,在成膜后的涂料的表面浮著的氣泡,這些就是對保定環氧地坪影響就是很大的,所以就是我們一定要注意這點,一般解決方法就是以下幾點:

After the curing of epoxy floor paint, there will be many bubbles on the surface. How to solve them? It is an inevitable phenomenon that there are bubbles on the epoxy floor. As long as the bubbles are produced, the main reason is that the air generated by the heat generated by the reaction of epoxy with curing agent during the use of the coatings and the bubbles floating on the surface of the coatings after the film forming process have a great influence on the floor. So We must pay attention to this. The general solutions are as follows: A. 在施工工程中,將攪拌后的涂料放置一段時間后再使用,可免除氣泡的產生。

A. In construction projects, the mixing of paint after a period of time before use, can avoid the production of bubbles.

B. 在涂料生產中,適當加入消泡劑,以降低涂料的表面張力,消除氣泡的產生,但是,消泡劑的加入,必須接近其相容性和溶解性的極限,否則又會產生縮孔

B. In the production of coatings, defoamers should be properly added to reduce the surface tension of coatings and eliminate the formation of bubbles. However, the addition of defoamers must be close to the limit of compatibility and solubility, otherwise shrinkage will occur.

C.選用固化慢一點、黏度小一點的固化劑!

C. choose slower curing agent with less viscosity.



標簽:   保定環氧地坪 地坪 保定環氧地坪漆 保定環氧地坪施工
亚洲日本va午夜中文字幕,国产在线精品亚洲第1页,性大毛片视频播放,97视频精品全国免费观看,亚洲欧美日产综合在线网,日本不卡免费一区二区,电影 国产 偷窥 亚洲 欧美